WATER-BASED PAG DRY FILM CHAIN LUBRICANT WITH GRAPHITE FOR HIGH TEMPERATURES
a high temperature chain lubricant formulated from a pure graphite base
suspended in a synthetic lubricant and water carrier that dries quickly to
form an adherent film on virtually all surfaces, including glass and
stable at service temperatures of 316°C (600°F) and at intermittent
temperatures of 1200°C (2200°F).
approved by theCanadian
Food inspection Agency(CFIA)
for use in food processing plants.
must be clean and dry. Etching or sandblasting will improve adhesion and wear properties.
DILUTION: XL-2361must be
diluted with soft, distilled, or demineralized water to bring the
product to the desired consistency prior to use, if necessary. This is
achieved by adding water toXL-2361,
and NOT vice-versa. Addition of water must be done while solution is
being thoroughly agitated.
be applied by using spray, brush, or dip methods. For oven chains and rollers,XL-2361should
be sprayed onto warm surfaces at temperatures greater than 100°C/212°F
and spray pressures between 80-100 PSI so that the water component will
evaporate on contact, and provide optimum film formation.
XL-2361 (as supplied)
Water, Synthetic Lubricant
XL-2361 (when cured)
Coefficient of Friction:
Recommended thickness (mm)
0.003 – 0.008
MIX WELL BEFORE USING STORE AT ROOM TEMPERATURE KEEP CONTAINER WELL-SEALED KEEP FROM FREEZING