XL-0545 is a non-flammable,
non-corrosive, odorless, low toxicity
that is specifically formulated for highly critical applications where any
oxidizing materials present may result in catastrophic chemical or explosive

XL-0545 is formulated from saturated hydrogen-free chlorofluorocarbons which are chemically
inert, non-flammable, have inherently high thermal stability, excellent
lubricity, high dielectric strength, high density, and non-polar


XL-0545 halocarbon
grease is inert toward practically all compounds and solutions except to
chemicals that are prone to attack silica (hydrogen fluoride, etc).

XL-0545 is compatible with the following common chemicals, and many others not listed below
or not as widely used:

• Aluminum Chloride • Hydroiodic Acid
• Ammonium Nitrate • Muriatic Acid
• Ammonium Perchlorate • Nitrogen Oxides (all)
• Antimony Trichloride • Nitrogen Trifluoride
• Boron Trichloride • Oleum
• Boron Trifluoride • Oxygen (liquid & gases) 
• Bromine • Ozone
• Bromine Trifluoride (gas) • Phosphorous Oxychloride
• Calcium Hypochlorite • Potassium Perchlorate
• Chlorinated Cyanurates • Potassium Persulfate
• Chlorine • Silane
• Chlorine Dioxide • Silicon Tetrachloride
• Chlorine Trifluoride (gas) • Sodium Chlorate
• Chlorosilanes • Sodium Hydroxide (all %)
• Chlorosulfonic Acid 
• Sodium Hypochlorite
• Chromic Acid • Sulfur Hexafluoride
• Chromyl Nitrate • Sulfur Trioxide 
• Ethylene Oxide • Sulfuric Acid 
• Fluorine (gas) • Thionyl Chloride
• Fuming Nitric Acid • Titanium Tetrachloride
• Hydrogen Peroxide • Uranium Hexafluoride
• Hydrogen Sulfide 

 is NOT recommended in
areas where it might come into contact with Sodium or Potassium Metals, Amines,
liquid Fluorine, or liquid Chlorine Trifluoride. They should also 
be used
aluminum and magnesium (and alloys of these metals) under conditions of 
shear forces
as those found in threaded connections.

XL-0545 will not contribute fuel in fire-prone applications.

Chemical compatibility should be tested in the field to determine final
usability of the



XL-0545 is
stable at operating temperatures less than 204ºC and intermittently to 260ºC.
Higher temperatures will accelerate the decomposition of the rust inhibitors and
lubricant base stocks.


XL-0545 is compatible with the following seals, rings, and gaskets:

• Buna N • PNF
• Chlorinated polyethylene • Polyamide
• Cured Epoxies • Polycarbonates
• EDPM • Polyvinyl Alcohol
• Ethylene Propylene Rubber • Teflon®
• Fluorosilicone • Urethanes
• Neoprene • Viton, Fluorel

XL-0545 is NOT compatible

• Buna S • Silicone Rubbers
• Natural Rubber • PVC
• Polymers or copolymers of chlorotrifluoroethylene

XL-0545 is non-corrosive towards metals up to about 177ºC (with the exception of copper and
some of its alloys) which will discolor over 50ºC. Prior testing should be done
on all metals above these temperatures.




Category: .

Related Products