XL-0715
100% SYNTHETIC NON-MELTING PAO GREASE FOR HIGH TEMPERATURES
XL-0715 is
an olefin-based grease designed for critical high temperature performance. XL-0715 is
formulated with high polymer base stocks, which result in exceptionally low
volatility at higher temperatures, as depicted in the table below.
| FEATURES: | |
|---|---|
| • Exceptional Thermal Stability | • Non Carbonizing |
| • High Performance EP Additives | • Waterproof |
| • Superior Rust Protection | • Performs from idle to high R.P.M. |
| • Non Melting, Non Dripping | |
| APPLICATIONS: |
|---|
| • Foundries |
| • Skate Bearings |
| • Ovens |
| • Dryers, etc |
| VOLATIZATION OVER 72 HOURS |
|---|
| 72 hours @ 200°C…………………………. 1% |
| 72 hours @ 250°C…………………………. 4% |
| 72 hours @ 300°C……………………….. 12% |
| 72 hours @ 350°C ……………………….. 28% |
| 72 hours @ 400°C ……………………….. 70% |
XL-0715/252 is a special grade formulated with a calcium sulphonate base to provide the same
protection at lower temperatures.
| TYPICAL SPECIFICATIONS | |||
|---|---|---|---|
| Product Code: XL-0715 | /001 | /002 | /252 |
| N.L.G.I. Grade: | 1 | 2 | 2 |
| Penetration @ 25°C (ASTM D-217) | 320 | 279 | 265 |
| After 60 strokes | 325 | 280 | 275 |
| After 10,000 strokes | 336 | 302 | 280 |
| After 100,000 strokes (with 10% water) | 340 | 306 | 306 |
| Dropping Point (°C) (ASTM D-2265) | None | >250 | |
| Melting Point (°C) | None | ||
| Copper Strip Test (163°C for 3 hours) | Negative | ||
| Texture | Smooth / Tacky | ||
| Colour | Yellow or Blue | Brown/yellow | |
| Timken OK Load (kg) (ASTM D-2509) | 22 | 22 | 22 |
| Type of thickener | Synthetic Silica | ||
| Oil Separation (24hrs @ 25°C) (ASTM D-1742) | 2.5% max | 1% max | 1% max |
| Temperature Range (°C) | -19 to 400 | -19 to 400 | -40 to 325 |
| Minimum Dispensing Temperature (°C) | -18 | -10 | -35 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 1250 | 1250 | 350 |
| Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) | 100 | 100 | n/a |
| Toxicity | Not controlled |
||
N.B. Because of the highly adhesive and thixotropic nature of XL-0715 precautions
must be taken NOT to “over-lubricate” bearings. Apply XL-0715 SPARINGLY to
a clean, dry bearing. Inspect during use to determine re-lubrication cycle.
XL-0715
