XL-0750
XL-0750
2.00 out of 5
XL-0750
“TACK PACK” ADDITIVE FOR GEAR OIL, CIRCULATION AND HYDRAULIC FLUIDS
XL-0750 is a carefully blended, high quality “Polymer Tackifier Package” designed for use as an additive to petroleum or synthetic-based circulating oil, hydraulic, and gearbox fluids. Ecological considerations and pressure from environmental groups have increased the awareness of plant personnel and has resulted in an increased importance in reducing waste. Older machinery may tend to leak oils as seals and gaskets deteriorate, and years of vibration may even cause metallic housings to wear. It has been observed, in some locations, that thousands of gallons of oil have to be “topped off” monthly due to leakage and splashing. XL-0750 Tack Pack will aid in the overall reduction of leakage and splashing without changing the existing base fluids. XL-0750 also contains chemicals that will help to wet-out dry seals and gaskets over a period of time. XL-0750 should be blended directly to the fluid reservoir at 1% (1 gallon XL-0750 to 100 gallons fluid) using a high-speed mixer or drill. The performance of the system should be monitored over a period of up to two weeks in order to verify the degree of improvement. If necessary, the procedure can be repeated to a maximum of 3% XL-0750.XL-0750 is an economical approach to increasing productivity and protecting the environment by reducing waste. Please Note that theXL-0750 must also be blended (1% to 3%) to the fluids that are being used to “top off” the system at the same ratio that is in the reservoir.
IN 205 LITRES: | IN 45 GALLONS: | ||
---|---|---|---|
XL-0750 | 1% = 2 litres | XL-0750 | 1% = 0.5 gallon |
XL-0750 | 2% = 4 litres | XL-0750 | 2% = 1.0 gallon |
XL-0750 | 3% = 6 litres | XL-0750 | 3% = 1.5 gallon |
PLEASE NOTE: XL-0750 is NOT recommended for compressors, internal combustion, engines, or for ambient temperatures above 93ºC.
XL-0750 is not compatible with water- or glycol-based fluids.
Category: ADDITIVES.