XL-1845
POLYON® SYNTHETIC XEP HEAVY DUTY
WATERPROOF GREASE WITH PTFE & MOLY
XL-1845 is a carefully homogenized blend of synthetic bases combined with P.T.F.E. and
molybdenum, as well as E.P. (extreme pressure) additives.
XL-1845 is a superior waterproof non-melting grease, which measures 90lbs plus on the
Timken Load test.
The additives used in the blending of XL-1845 have
been designed to give the greatest adherence to metallic surfaces. XL-1845 virtually
eliminates direct surface-to-surface contact of metal parts when machines are
idle, during initial start-up, and during intermittent use. XL-1845 is
resistant to acids, alkali and salt water. This grease is recommended for severe
environmental conditions as well as heavy loads.
XL-1845 is available in several NLGI Grades, and can be formulated with a range of base oil
viscosities.
XL-1845 is recommended for the following:
| • Bearings | • High and low speed motors |
| • Conveyers | • Pulp & Paper industry |
| • 5th wheel | • Textile finishing |
| • Chassis | • Steel mills |
| • Heavy equipment | • Marine equipment |
| • All season lubrication |
| TYPICAL SPECIFICATIONS | |
|---|---|
| Product Code: XL-1845 | (General Specifications) |
| Dropping Point (°C) (ASTM D-2265) | None |
| Melting Point (°C) | None |
| Copper Strip Test (163°C for 3 hours) | Negative* |
| Texture | Adhesive / Tacky |
| Type of thickener | Clay / Silica* |
| Oil Separation (24hrs @ 25°C) (ASTM D-1742) | < 1%** |
| Additives | PTFE, Molybdenum |
| Temperature Range (°C) | -40 to 200 |
| Toxicity | Not controlled |
| * Except 400 Series ** Except 600 Series |
|
| TYPICAL SPECIFICATIONS | ||||
|---|---|---|---|---|
| Product Code: XL-1845 | /000 | /001 | /002 | /003 |
| N.L.G.I. Grade: | 0 | 1 | 2 | 3 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 160 | |||
| Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) | 21.7 | |||
| Penetration @ 25°C (ASTM D-217) | 355 | 325 | 265 | 240 |
| After 60 strokes | 370 | 331 | 268 | 240 |
| After 10,000 strokes | 375 | 335 | 273 | 247 |
| After 60,000 strokes | 377 | 343 | 275 | 255 |
| Minimum Temperature (°C) | -40 | -40 | -30 | -15 |
| Maximum Temperature (°C) | 270 | 270 | 270 | 270 |
| Timken OK Load (kg (lbs)) (ASTM D-2509) | 35 (75) | 45 (99) | 45 (99) | 45 (99) |
| Colour | White-yellow | |||
| Product Code: XL-1845 (200 Series) | /201 | /202 | /203 |
|---|---|---|---|
N.L.G.I. Grade: |
1 | 2 | 3 |
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) |
220 | 220 | 220 |
Penetration @ 25°C (ASTM D-217) |
330 | 270 | 242 |
After 60 strokes |
333 | 272 | 241 |
After 10,000 strokes |
335 | 273 | 247 |
After 60,000 strokes |
343 | 275 | 255 |
Minimum Temperature (°C) |
-16 | -18 | -15 |
Maximum Temperature (°C) |
270 | 270 | 270 |
Timken OK Load (ASTM D-2509) |
40kg (90lbs) | ||
Colour |
White-yellow |
| Product Code: XL-1845 (300 Series) | /321 | /322 | /323 |
|---|---|---|---|
N.L.G.I. Grade: |
1 | 1.5 | 2 |
Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) |
335 | 335 | 335 |
Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) |
29 | 29 | 29 |
Penetration @ 25°C (ASTM D-217) |
355 | 290 | 265 |
After 60 strokes |
370 | 297 | 270 |
After 10,000 strokes |
375 | 300 | 270 |
