XL-2359
XL-2359
WATER-BASED DRY FILM WITH MOLYBDENUM FOR HIGH TEMPERATURES
XL-2359 has
been carefully formulated to function as a high-temperature lubricant suitable
for use on metal forging and mold release applications where a tenacious
lubricant film is needed.
XL-2359 is a
colloidal dispersion of extremely fine sub-micron molybdenum in a water-based
carrier that dries to form an electrically conductive adherent film on virtually
all surfaces, including glass and flexible materials.
XL-2359°
remains stable at service temperatures of 316°C/600°F and at intermittent
temperatures of 1200°C/2200°F°
Advantages:
• Environmentally
friendly
• Non-flammable
• Non-oxidizing
• Non-toxic
(when dry)
Dilution:
XL-2359 must be diluted
with soft, distilled, or demineralized water to bring the product to the
desired consistency. The water must be added to the XL-2359,
and NOT THE REVERSE. Add water to solution while mixing.
Method of
application:
XL-2359 should be
applied by brush or sprayer directly on to the metal surface. XL-2359 dries
in approximately 20 minutes. If surface temperatures are over 100°C the
water portion of XL-2359 will
evaporate quickly leaving a fine film of molybdenum.
PHYSICAL PROPERTIES | |
---|---|
XL-2359 (as supplied) | |
Lubricant: | Sub-micron molybdenum |
Fluid Component: | Water |
Diluents: | Water |
Colour: | Dark Grey |
XL-2359 (when cured) | |
Coefficient of Friction: | 0.23 static |
Film thickness (mm): | 0.008 – 0.013 |
MIX WELL BEFORE USING
STORE AT ROOM TEMPERATURE
KEEP FROM FREEZING
Category: CHAIN OILS.