XL-2360

XL-2360

WATER-BASED GRAPHITE COATING

XL-2360 is a colloidal dispersion of extremely fine pure graphite in a water-based carrier
that dries to form an electrically conductive adherent film on virtually all
surfaces, including glass and flexible materials.

XL-2360 remains
stable at service temperatures of 316°C/600°F and at intermittent temperatures
of 1200°C/2200°F.

Advantages:

• Environmentally safe

• Non-flammable

• Non-corrosive

• Non-toxic

SURFACE
PREPARATION:
 Substrate
must be clean and dry. Etching or sandblasting will improve adhesion and
wear properties.

DILUTION: XL-2360 must
be diluted with soft, distilled, or demineralized water to bring the product
to the desired consistency prior to use. This is achieved by adding water to XL-2360,
and NOT vice-versa. Addition of water must be done while solution is being
thoroughly agitated.

APPLICATION: May
be applied by using spray, brush, or dip methods. Dries in 20 minutes. If
surface temperatures are over 100 °C the water portion of XL-2360 will
evaporate quickly leaving a fine film of graphite.

PHYSICAL PROPERTIES

XL-2360 (as supplied)
Lubricant: Micro-graphite
Fluid Component: Water
Diluents: Water
Colour: Dark Grey

XL-2360 (when cured)
Coefficient of Friction: 0.22 static
Film thickness (mm): 0.003 – 0.008

MIX WELL BEFORE USING 
STORE AT ROOM TEMPERATURE 
KEEP FROM FREEZING

 

XL-2360

 

Category: .

Related Products