WATER-BASED PAG DRY FILM CHAIN LUBRICANT WITH MOLYBDENUM FOR HIGH TEMPERATURES
XL-2362has been carefully formulated to function as a high temperature lubricant suitable
for use on chains, wire drawing, metal forging, and mold release applications
where a tenacious lubricant film is required. The pure molybdenum suspended in
water dries and forms a film that will adhere to virtually any surface.
XL-2362remains stable a service temperature up to 316°C or 600°F.
• Environmentally friendly
• Non flammable
• Non oxidizing
XL-2362 (as supplied)
XL-2362 (when cured)
Coefficient of Friction:
Film thickness (mm):
0.008 – 0.013
Surface should be thoroughly cleaned and dried prior to application ofXL-2362in
order to insure the greatest film stability. Pressure washing or sand-blasting
of surface prior to application is highly recommended.
METHOD OF APPLICATION: XL-2362can be applied with a brush or sprayed directly to metal surface. For oven
chains and rollers,XL-2362should
be sprayed onto warm surfaces at temperatures greater than 100°C/212°F and spray
pressures between 80-100 PSI so that the water component will evaporate on
contact, and provide a fine film of molybdenum and PAG.