XL-7333 is a non-flammable, non-corrosive, odourless, low toxicity oil that is specifically
formulated for highly critical applications where any oxidizing materials
present may result in catastrophic chemical or explosive reactions.

XL-7333 is formulated from saturated hydrogen-free
, which are chemically inert, non-flammable, have
inherently high thermal stability, excellent lubricity, high dielectric
strength, high density, and non-polar characteristics.


XL-7333 halocarbon oil is inert toward practically all compounds and solutions except to
chemicals that are prone to attack silica (hydrogen fluoride, etc).

XL-7333 is compatible with the following common chemicals, and many others not listed below
r not as widely used:

Aluminum Chloride Hydroiodic Acid
Ammonium Nitrate Muriatic Acid
Ammonium Perchlorate Nitrogen Oxides (all)
Antimony Trichloride Nitrogen Trifluoride
Boron Trichloride Oleum
Boron Trifluoride Oxygen (liquid & gases)
Bromine Ozone
Bromine Trifluoride (gas) Phosphorous Oxychloride
Calcium Hypochlorite Potassium Perchlorate
Chlorinated Cyanurates Potassium Persulfate
Chlorine Silane
Chlorine Dioxide Silicon Tetrachloride
Chlorine Trifluoride (gas) Sodium Chlorate
Chlorosilanes Sodium Hydroxide (all %)
Chlorosulfonic Acid Sodium Hypochlorite
Chromic Acid Sulfur Hexafluoride
Chromyl Nitrate Sulfur Trioxide
Ethylene Oxide Sulfuric Acid
Fluorine (gas) Thionyl Chloride
Fuming Nitric Acid Titanium Tetrachloride
Hydrogen Peroxide Uranium Hexafluoride
Hydrogen Sulfide

XL-7333 is NOT recommended in areas where
contact may occur with sodium- or potassium-based metals, amines, liquid
fluorine, or liquid chlorine trifluoride. They should also not be used with
aluminum and magnesium (and alloys of these metals) under conditions oflarge
shear forces
 such as those
found in threaded connections.

XL-7333 will not contribute fuel in fire prone applications.

Chemical compatibility should be tested in the field to determine final
usability of the lubricant.


XL-7333 is stable at operating temperatures less than 204°C/400°F and intermittently to
260°C/500°F. Higher temperatures will accelerate the decomposition of the rust
inhibitors and lubricant base stocks.


XL-7333 is compatible with the following seals, rings, and gaskets:
Ethylene Propylene Rubber Polyamide
Polyvinyl Alcohol Polycarbonates
Buna N Fluorosilicone
Neoprene Teflon
Chlorinated polyethylene Cured Epoxies
Urethanes PNF
Viton, Fluorel EDPM
XL-7333 is NOT compatible with:
Buna S Natural Rubber
Silicone Rubbers PVC
Polymers or copolymers of chlorotrifluoroethylene. 

XL-7333 is non-corrosive towards metals up to about 177ºC (with the exception of copper and
some of its alloys) which will discolor over 50ºC. Prior testing should be done
on all metals above these temperatures.




Category: .

Related Products