XL-7333is a non-flammable, non-corrosive, odourless, low toxicity oil that is specifically
formulated for highly critical applications where any oxidizing materials
present may result in catastrophic chemical or explosive reactions.
XL-7333is formulated from saturatedhydrogen-free
chlorofluorocarbons, which are chemically inert, non-flammable, have
inherently high thermal stability, excellent lubricity, high dielectric
strength, high density, and non-polar characteristics.
XL-7333halocarbon oil is inert toward practically all compounds and solutionsexceptto
chemicals that are prone to attack silica (hydrogen fluoride, etc).
XL-7333is compatible with the following common chemicals, and many others not listed below
or not as widely used:
Nitrogen Oxides (all)
Oxygen (liquid & gases)
Bromine Trifluoride (gas)
Chlorine Trifluoride (gas)
Sodium Hydroxide (all %)
Fuming Nitric Acid
XL-7333isNOT recommendedin areas where contact may occur with sodium- or potassium-based metals, amines, liquid
fluorine, or liquid chlorine trifluoride. They should also not be used with
aluminum and magnesium (and alloys of these metals) under conditions oflarge
shear forcessuch as those
found in threaded connections.
XL-7333will not contribute fuel in fire prone applications. Chemical compatibility should be tested in the field to determine final
usability of the lubricant.
XL-7333is stable at operating temperatures less than 204°C/400°F and intermittently to
260°C/500°F. Higher temperatures will accelerate the decomposition of the rust
inhibitors and lubricant base stocks.
XL-7333 is compatible with the following seals, rings, and gaskets:
Ethylene Propylene Rubber
XL-7333 is NOT compatible with:
Polymers or copolymers of chlorotrifluoroethylene.
XL-7333is non-corrosive towards metals up to about 177ºC (with the exception of copper and
some of its alloys) which will discolor over 50ºC. Prior testing should be done
on all metals above these temperatures.